Soil Sampling at Dundas Further Defines Lithium Targets
Released
Released
Announcement PDF
Infill Soil Sampling at Dundas Further Define s Lithium
Targets
ASX Announcement
1 0 Ju n e 2 0 2 5
Lightning Minerals (L1M or the Company) is pleased to announce the results of a targeted infill soil sampling
program at its Dundas lithium project in Western Australia. The program of 499 samples was designed to
infill the existing geochemistry program which was completed on a grid spacing of 400m x 400m.
A number of areas of interest were identified in the previously completed regional soil sampling program,
particularly on Dundas North tenements E28/3027 and E28/3028 where broad lithium in soil anomalism was
identified across an area of 35km2 and up to 147ppm Li1.
HIGHLIGHTS
•
Infill soil sampling program completed of 499 samples to further test previously
identified lithium in soil anomalism of up to 147ppm Li 1
•
Assays up to 147ppm Li further assist in target generation at Dundas North, and assays
up to 104ppm Li at Dundas South
•
Expenditure commitments met through completion of works. Targets at Dundas are
being evaluated and prioritised for when lithium sentiment turns
Lightning Minerals Managing Director Alex Biggs said, “We are pleased to receive further positive lithium in
soil anomalism at Dundas as we look at furthering our target generation strategies. It’s important that we
ensure our expenditure commitments are met on our assets in the most cost-effective way despite the
negative lithium sentiment at present. We continue our target generation work in Brazil in preparation of a
more positive lithium market at which point we will have multiple targets ready for execution”.
Dundas North Infill Soil Sampling
Phase 1 soil sampling was completed during Q1 and Q2 of CY2023 with samples collected on a nominal
400m x 400m grid across the tenements, with analysis completed by LabWest Minerals Analysis (LabWest).
Analysis utilised the Ultrafine + (UFF+) method with chemical analysis for a suite of 62 elements including
lithium and associated pathfinders typically used for identification of lithium-caesium-tantalum (LCT)
pegmatites. Infill sampling was completed down to 200m x 100m with peak results of 147ppm Li.
Dundas South Infill Soil Sampling
Soil sampling was also completed at the Dundas South project area following up zones of interest identified
by the previous regional soil program. Sampling was completed down to a minimum of 200m x 200m, with
peak results of 104ppm Li. Targeting criteria in these areas focuses mainly on existing results for lithium and
its pathfinder elements identified during the regional program (as reported in ASX Announcement 23 March
2023).
1
ASX Announcement 01 May 2023
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Figure 1: Lightning Minerals - Dundas North tenure showing UFF+ lithium soil geochemistry results and
incorporating previous results as reported 01 May 2023, with Magnetic RTP background
Figure 2: Lightning Minerals - Dundas South tenure showing UFF+ lithium soil geochemistry results and
incorporating previous results as reported 23 March 2023, with Magnetic RTP background
Approved for release by the Board of Directors
-ENDMore information at www.lightningminerals.com.au
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
ABOUT LIGHTNING MINERALS
Lightning Minerals is a mineral exploration company, listed on the Australian S ecurities Exchange (ASX:L1M) and focused
on the exploration of critical minerals and lithium at its tenements across Western Australia. The recent acquisition of the
Caraíbas, Canabrava and Esperança lithium projects in Minas Gerais, Brazil are potentially transformational to the
Company’s success in the lithium sector. The Company also owns the Dundas lithium project in the prolific Dundas region
of Western Australia, the Dalmas and Hiver lithium projects in Quebec, Canada, another significant and evolving lithium
region globally. The Company also holds other projects in Western Australia which include Mt Jewell, Mt Bartle and Mailman
Hill which are prospective for base metals and critical minerals.
FORWARD LOOKING STATEMENTS
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking
statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”,
“estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements
regarding plans, strategies and objectives of management, anticipated production or construction commencement dates
and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the
Company’s actual results, performance and achievements to differ materially from any future results, performance or
achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange
fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of
exploration and project development, including the risks of obtaining necessary licences and permits and diminishing
quantities or grades of reserves, political and social risks, changes to the regulatory framework within which the Company
operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and
retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the
financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and
operations in the future. The Company does not give any assurance that the assumptions on which forward looking
statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any
material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the
Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to
differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual
results, performance, achievements or events not to be as anticipated, estimated or intended, and many events are beyond
the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking
statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing
obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company
does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any
change in events, conditions or circumstances on which any such statement is based.
COMPETENT PERSONS STATEMENT
The information contained herein that relates to exploration results is based on information compiled or reviewed by Mr
Matthew Watson, who is a Competent Person and a member of the Australasian Institute of Mining and Metallurgy. Mr
Watson is a full-time employee of the Company. Mr Watson has sufficient experience which is relevant to the style of
mineralisation and types of deposit under consideration and to the activity which he is undertaking to qualify as a Competent
Persons as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Watson consents to the inclusion of his name in the matters based on the information in the form and
context in which it appears.
REFERENCES TO PREVIOUS ANNOUNCEMENTS
The Company confirms that it is not aware of any new information or data that materially affects the information included
in the original market announcements, and that all material assumptions and technical parameters have not materially
changed. The Company also confirms that the form and context in which the Competent Person’s findings are presented
have not been materially modified from the original market announcement .
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Appendix 1: Dundas – JORC Code 2012 Table 1 Criteria
The Table below summarises the assessment and reporting criteria used for exploration results for the Dundas Exploration Project and reflects the guidelines in Table 1 of The Australasian Code
for the Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC 2012 Code).
Section 1 - Sampling Techniques and Data
Criteria
Sampling techniques
Drilling techniques
Drill sample recovery
Logging
Sub-sampling techniques
and sample preparation
JORC Code explanation
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate to
the minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
Method of recording and assessing core and chip sample recoveries
and results assessed. Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain
of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Commentary
•
•
•
•
The Dundas Project soil samples are collected from below the natural surface at a depth of approximately 20cm.
Soil samples are sieved on site and the ~2mm fraction is retained for geochemical analysis.
Dundas soil sample weights are approximately 200 grams. All sieved material is collected in kraft packets (~200 grams).
The Ultrafine+ soil sampling analysis technique utilised for the Dundas Project is considered acceptable and standard
industry practice.
•
No drilling results reported
•
No drilling results reported
•
•
•
•
•
Soil sample sites are photographed, described, and journaled noting landform and nature of soil media.
Soil sample descriptions are considered qualitative in nature.
Sample preparation for the Dundas Project soil geochemistry program follows best practice as advised ‘LabWest
Minerals Analysis’ whom is accredited to ISO17025.
Soil sample sizes of approximately 200gm are considered appropriate for the Ultrafine+ analytical technique.
Dundas soil samples were collected on a 400mx400m grid pattern, with local sampling on 200mx200m and 200mx100m
grid patterns. Minor variations to sample site locations will occur due to field complexities.
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Quality of assay data and
laboratory tests
Verification of sampling
and assaying
Location of data points
Data spacing and
distribution
Orientation of data in
relation to geological
structure
Sample security
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations used
in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
The measures taken to ensure sample security.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The analysis of soil samples by LabWest using the Ultrafine+ method is adequate at this early stage of exploration, this
includes the assessment of bedrock under quaternary cover.
LabWest and Nagrom use internal QAQC process which is relevant to the stage of exploration activities.
The remaining bulk of each sample (-2mm) has been retained and the coarse fraction/pulp (if one existed) of each sample
has also been preserved.
No drilling results are being reported.
No twinned holes or drilling results are reported.
No rock chip sample results are being reported.
Primary soil sample locations are collected electronically via a handheld GPS – Garmin GPSMap 62s.
No adjustments have been applied to laboratory assay results.
Handheld Garmin GPS instruments were used to locate the sample sites, these instruments are understood to be accurate
within a nominal ±5m in the horizontal and vertical planes.
This spatial location accuracy is considered adequate for early grid soil sampling programs.
All samples were collected in the Geocentric Datum of Australia 1994 (GDA94) system. (MGA94, Zone 51)
Soil samples were taken on a 400m x 400m grid, with local sampling on 200mx200m and 200mx100m grid patterns.
These samples spacings may require minor and infrequent variation dependent on field conditions.
The reporting of field observations is not indicative of mineralisation. Further exploration work including an assessment of
the current soil sampling results and follow up drilling and sampling are required to confirm the presence of any
mineralisation.
There is no known sample representivity to mineralisation at this early stage of exploration sampling.
No compositing has been undertaken on the soil samples.
The strike of geological units across the Dundas project is variable.
The Phase 1 400mx400m sample spacing grid is sufficient to ensure that no specific structures or known trends of
mineralisation have received biased targeting.
Sample selection contained within this report are considered representative of the immediate location at which sampling
took place. No specific structures or known trends of mineralisation within the pegmatites have received biased
targeting.
Samples were secured in closed HDPE bags and stored at secure premises during the field campaign.
The field supervisor who supervised the soil sample collection delivered the sample packets to the laboratory.
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Audits or reviews
•
The results of any audits or reviews of sampling techniques and data.
No audits or reviews of sampling techniques have been conducted to date.
Section 2 - Reporting of Exploration Results
Criteria
Mineral tenement and
land tenure status
JORC Code explanation
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration done by other Acknowledgment and appraisal of exploration by other parties.
parties
Commentary
•
•
•
•
•
•
•
•
Geology
Deposit type, geological setting and style of mineralisation.
•
•
•
Drill hole Information
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
down hole length and interception depth,
o
hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from the
understanding of the report, the Competent Person should clearly explain
why this is the case.
•
The Dundas Projects are located ~600km east of Perth and 20 to 50 km ENE of Norseman in Western Australia.
The Dundas Project area totals ~450km2 and comprises eight granted exploration licences separated into two exploration
areas – Dundas North (E28/3027 and E28/3028) and Dundas South (E15/1748, E63/1932, E63/1993, E63/2000, E63/2001,
and E63/2028)
The Tenements are covered by the Ngadju Determined Native Title Claim (WCD2014/004). An agreement is in Place
between the Ngadju Native Title Aboriginal Corporation RNTBC and Lightning Minerals.
The Tenements are considered in good standing at the time of this report.
The Project area has been explored predominantly for Gold and Nickel by various prior parties.
More recent exploration has included a focus on Lithium via explorers such as Matsa Resources (2008 -2018), West
Resource Ventures (2018 – 2019), and Liontown Resources (2018-2020).
The result of this work is described in numerous publicly available Geological Society of Western Australia publications.
Review of the considerable historic exploration activities is ongoing; data is being collated into company databases as per
industry standard data collection practice.
No known mineral deposits occur within project tenure.
There are publicly reported occurrences of Lithium – Caesium-Tantalum (LCT) pegmatites within acceptable proximity to
the Dundas Project exploration tenure.
The Dundas Project is located at the southern-eastern end of the Norseman-Wiluna Belt within the Archaean Yilgarn
Craton. The project area sits adjacent to the Jerdacuttup Fault which represents the boundary or the Archaean Yilgarn
Craton with the adjacent Proterozoic Albany-Fraser Province.
No drilling results are being reported.
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Data aggregation
methods
Relationship between
mineralisation widths
and intercept lengths
Diagrams
Balanced reporting
Other substantive
exploration data
Further work
In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high-grade results
.
and longer lengths of low grade results, the procedure used for such
aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
These relationships are particularly important in the reporting of Exploration
Results. If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported. If it is not known and only the
down hole lengths are reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These should
include, but not be limited to a plan view of drill hole collar locations and
appropriate sectional views.
Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should
be practiced to avoid misleading reporting of Exploration Results.
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
The nature and scale of planned further work (eg tests for lateral extensions
or depth extensions or large-scale step-out drilling). Diagrams clearly
highlighting the areas of possible extensions, including the main geological
interpretations and future drilling areas, provided this information is not
commercially sensitive.
•
•
•
•
•
•
•
•
•
•
•
No levelling of the raw geochemical data was undertaken.
Images have been generated using Micromine software.
No metal equivalent values are reported.
Any relationship between reported geochemical results and potential mineralisation is unknown at the time of the report.
Appropriate two-dimensional plans have been included in the body of this announcement; these plans suitably represent
the nature of surface geochemical sampling.
Representative reporting of soil results is shown in Figure 1 and 2 of the above report.
Soil assay data for Dundas North soil samples with greater than 80 ppm lithium are shown in Appendix 2.
Soil assay data for Dundas South soil samples with greater than 80 ppm lithium are shown in Appendix 3.
All meaningful data and relevant information has been included in the body of the report.
Field validation of elevated Lithium results is planned by company geologists.
Planning of follow up Aircore, Reverse Circulation or Diamond Drilling of Geochemical targets remains under consideration.
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Appendix 2: Dundas North Soil data for results >80ppm lithium
Project
Sample
Type
Sample ID
Easting
(MGA94_Z51)
Northing
(MGA94_Z51)
Lithium
(ppm)
Caesium
(ppm)
Dundas North
Soil
DS04605
6,512,802
465,004
88
7
Dundas North
Soil
DS04606
6,514,802
465,402
101
11
Dundas North
Soil
DS04619
6,514,398
466,196
92
12
Dundas North
Soil
DS04621
6,513,602
466,200
131
14
Dundas North
Soil
DS04625
6,514,402
466,603
88
12
Dundas North
Soil
DS04632
6,507,599
452,192
97
10
Dundas North
Soil
DS04647
6,505,601
452,600
141
7
Dundas North
Soil
DS04656
6,505,999
452,998
94
7
Dundas North
Soil
DS04665
6,506,397
453,394
92
6
Dundas North
Soil
DS04673
6,507,197
453,795
84
9
Dundas North
Soil
DS04675
6,506,395
453,798
81
8
Dundas North
Soil
DS04682
6,507,999
454,192
147
5
Dundas North
Soil
DS04685
6,506,796
454,197
87
7
Dundas North
Soil
DS04687
6,505,998
454,198
85
8
Dundas North
Soil
DS04692
6,508,000
454,591
85
6
Dundas North
Soil
DS04693
6,507,597
454,595
88
7
Dundas North
Soil
DS04696
6,506,400
454,596
83
8
Dundas North
Soil
DS04734
6,515,200
465,107
83
11
Dundas North
Soil
DS04753
6,516,805
464,602
86
8
Dundas North
Soil
DS04760
6,515,627
464,998
95
11
Dundas North
Soil
DS04772
6,510,397
465,403
82
8
Dundas North
Soil
DS04778
6,510,396
465,800
85
8
Dundas North
Soil
DS04779
6,510,001
465,804
85
8
Dundas North
Soil
DS04799
6,504,399
455,400
98
12
Dundas North
Soil
DS04811
6,501,999
455,804
87
18
Dundas North
Soil
DS04818
6,502,001
456,201
112
16
Dundas North
Soil
DS04820
6,503,995
456,605
90
8
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Appendix 3: Dundas South Soil data for results >80ppm lithium
Project
Sample
Type
Sample ID
Easting
(MGA94_Z51)
Northing
(MGA94_Z51)
Lithium
(ppm)
Caesium
(ppm)
Dundas South
Soil
DS04967
6,469,004
402,587
82
4
Dundas South
Soil
DS04968
6,468,995
402,191
84
3
Dundas South
Soil
DS04974
6,455,011
426,630
84
6
Dundas South
Soil
DS04976
6,455,197
426,614
82
6
Dundas South
Soil
DS04979
6,454,604
426,790
95
7
Dundas South
Soil
DS04987
6,453,200
427,005
104
10
Dundas South
Soil
DS04988
6,452,989
427,007
90
15
Dundas South
Soil
DS04992
6,452,803
427,010
84
10
Dundas South
Soil
DS04993
6,452,786
427,220
81
9
L e ve l 1 1 , 4 0 The Esplanade , Pe r th, W e ste r n A ustr alia, 6 0 0 0 | admin@ lightningmine r als.c om.au | (0 8 ) 9 4 2 9 8 8 0 6
Share your feedback
Discover