Exploration Update for the Dundas Project
Released
Released
Announcement PDF
ASX Announcement
29 September 2023
Exploration Update for the Dundas Project
Lightning Minerals (L1M or the Company) provides an exploration update for drilling and assay results
on tenement E63/2001, and the progress of its soil geochemistry program on tenement E63/2000.
HIGHLIGHTS
o
Assays for the Company’s maiden drill campaign on tenement E63/2001 have now been
received. While Pegmatites have been intersected during drilling,1,2 no significant lithiumcaesium-tantalum (LCT) results are reported
o
Pathfinder elements within assay results are now under review to determine an appropriate
exploration strategy towards identification of potential LCT mineralisation within E63/2001
o
Infill soil sampling is ongoing on neighbouring tenement E63/2000 to follow up on positive
lithium in soil anomalism3 up to 218ppm lithium within an approximate 8km2 lithium anomaly
The maiden drill program at the Dundas South Project has been successful in locating a felsic
pegmatitic hydrothermal system within E63/2001. Assays have now been received for all pegmatite
samples submitted for laboratory analysis. Results for lithium-caesium-tantalum are subdued overall.
Some minor but non-material elevations in caesium, tantalum and tin are present in drill hole
DSRC0029. These may form the basis of further review which may determine future exploration
activities within tenement E63/2001.
Evaluation of results is currently underway to determine a relevant strategy for targeting potential LCT
pegmatite bodies concealed under salt lakes to the north-west of the completed drilling. This area
falls within the prospective Mt Kirk mafic geological unit that transects the tenement in a northnorth-west orientation.
Exploration on nearby tenement E63/2000 remains ongoing, with the infill soil sampling campaign
currently underway and nearing completion.
Lightning Minerals Chief Executive Officer Alex Biggs said, “Completion of our phase 1 drilling on
our E63/2001 tenement at Dundas is a positive step forward for the Company in understanding and
refining our exploration strategy for the Dundas region. To intersect pegmatites within a
hydrothermal system is a success and provides a positive indicator of lithium potential in the area. We
are continuing our soil sampling works on tenement E63/2000 with a view to defining drill targets
and following up on our highest lithium in soil assay of 218ppm lithium.
“Our aim at Lightning Minerals is to develop and test targets quickly and efficiently, generating
multiple pipelines of work both on our Australian assets and the recent acquisition of assets in James
Bay, Canada. We are developing a number of high-quality opportunities in the critical minerals sector
that we are aggressively exploring with a view to generating excellent returns for the Company’s
shareholders. I look forward to keeping you all updated on our progress”.
1
ASX Announcement 13 July, 2ASX Announcement 01 September 2023, 3ASX Announcement 23 March 2023
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
DRILLING RESULTS DISCUSSION FOR DUNDAS TENEMENT E63/2001
As previously reported1, exploration efforts on tenement E63/2001 uncovered pegmatites that were
concealed under transported cover. Following this development during the Aircore drilling program, a
limited number of additional RC drill metres were then allocated to define the spatial orientation and
test the mineral assemblage present at deeper intersections. The follow up RC holes successfully
intersected pegmatites beneath those identified by the earlier Aircore drilling.
The mineralogical assemblage present in the RC drilling was consistent with that reported in the
Aircore drilling, which is a feldspar-quartz-mica composition. The pegmatites exhibited a variable
grainsize with common chilling at the host rock contacts, with considerable interfingering with host
lithologies suggesting that the pegmatites may have intruded as a swarm with the potential for
multiple phases of intrusion.
The thickest intersection of pegmatite was returned from drillhole DSRC0029 which returned three
pegmatitic zones from 52-64m, 66-72m, and 76-93m downhole, as shown in Appendix 2. These
intersections appear of an adequate scale to support a thesis that a sizeable hydrothermal system may
be present in the vicinity. While the scale of the hydrothermal system is a positive indicator, the assay
results returned for all intersected pegmatites are not consistent with a high degree of LCT
fractionation from a lithium rich parent source melt, at the locations that have been drill tested.
While lithium content for the program has been found to be low, there are elevated responses in LCT
pathfinder elements with results of up to 363ppm caesium (Cs), 422ppm tin (Sn), and 422ppm tantalum
(Ta) being returned from drillhole DSRC0029. A full table of assay results for drillhole DSRC0029 is
available in Appendix 1 – Table 2. Geological logging of drillholes with pegmatite intersections are
available in Appendix 1 – Table 3.
While the analytical results are subdued, exploration upside remains for the E63/2001 tenement, as
hydrothermal systems that emplace pegmatites at this scale warrant further exploration, particularly
considering the context that they are located within 7kms of a known >15Mt lithium resource @ 1.0%
Li2O (Liontown Resources (ASX: LTR) Buldania/Anna project).
TECHNICAL DISCUSSION – PEGMATITE GEOCHEMISTRY WITHIN DUNDAS E63/2001
TENEMENT
The geological thesis for exploration within E63/2001 was that concealed LCT pegmatites may generate
a sufficient geochemical signature through the transported cover above to cause a geochemical
response in the soil. Previous exploration works by the Company utilising soil geochemistry identified
lithium-rubidium in-soil anomalies, these broadly coincide with the location of the pegmatites
uncovered during recent drilling (ASX Announcement 23 January 2023). Additionally, geophysical
targets interpreted from aeromagnetic interpretations further warranted drill testing and formed the
basis for drill targeting.
Future exploration in this area will continue to search for pegmatites of a similar fractionated
state/mineralised phase to those present at Liontown Resources’ (ASX: LTR) Buldania/Anna lithium
deposit to the north. The discovery of the unmineralised pegmatite bodies under cover, at the scale
they have been intersected downhole, is considered a positive indicator for the prospectivity for the
tenement. Other areas with similar transported cover within the tenement may also host similar
pegmatitic hydrothermal fluid systems without surficial expression, but within a geochemical setting
more aligned with the nucleation of lithium bearing minerals.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
The tenement is proximal to two granitoids of various origin, and the Buldania Granodiorite, which may
have played a role in the genetic emplacement of the pegmatites. It is unclear if the hydrothermal
system responsible for the emplacement of pegmatites within E63/2001 is the same as that responsible
for the Buldania/Anna deposit.
The exploration focus now shifts to the anomalism present on E63/2000 and the results of the infill
geochemistry program with a view to drill test any clustered zones of anomalism with Aircore drilling.
E63/2000 INFILL SOIL SAMPLING PROGRESS
Progress continues on the surface geochemical sampling infilling the current areas of interest which
included lithium in soil anomalism of up to 218ppm lithium. The initial sampling program was
completed on 400m x 400m centres, the planned infill soil sampling is shown in Figure 1. The results
will provide the company with a higher resolution of surface soil geochemistry coverage which will feed
directly into follow up exploration Aircore drilling which is anticipated to begin as early as Q4 CY23.
Further infill sampling is being assessed across the Company’s other Dundas tenements with the plan
to delineate additional targets for drill testing.
The results of the various iterations of sampling programs will include all applicable prospective
commodities for the Dundas Projects including lithium, rare earth elements (REE), gold, copper, nickel,
and platinum group elements (PGE).
Figure 1: Planned infill soil sampling campaign on tenements E63/2000 and E63/1993
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
DUNDAS PROJECT (LIGHTNING MINERALS 100%)
The Dundas Project area is located near Norseman in Western Australia and comprises eight
tenements totalling approximately 454km2. Norseman has a strong history of mining dating back to
1892 and is located 190km south of Kalgoorlie. Historically, Norseman and the Dundas area has
experienced mining in gold and nickel although over recent years the region has become an emerging
lithium and critical minerals province with multiple discoveries and significant exploration activity.
There are two project areas at Dundas:
a) South/western tenements surrounding Liontown Resources’ Buldania/Anna lithium deposit, and,
b) North/eastern tenements approximately 30km to the east of Alliance Mineral Assets’ Bald Hill
lithium-tantalum mine.
Figure 2: Location of Lightning Minerals’ Dundas projects
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
MT JEWELL, MAILMAN HILL AND MT BARTLE PROJECTS (LIGHTNING MINERALS 100%)
Lightning also has 100% interest in the Mt Jewell and Mailman Hill Projects to the north of Kalgoorlie in
Western Australia. The Company holds a 100% interest in the Mt Bartle Project where licence
applications are pending.
The Mt Jewell Project covers approximately 9km2 and is highly prospective for nickel with dominant
lithologies consisting of mafic and ultramafic domains. Mt Jewell is in the locality of the high-grade
Silver Swan, Carr Boyd and Scotia historic nickel mines.
The Mailman Hill Project covers approximately 102km2 and is located 25km east of Leonora and 10km
west of the Murrin Murrin nickel Project. The project is prospective for both gold and nickel.
The Mt Bartle Project covers approximately 396km2 and is prospective for base metals. The project is
situated in the locality of the Magellan lead Mine and 27km north-west of the mining centre of Wiluna.
Figure 3: Location of Lightning Minerals’ projects
This announcement has been approved for release by the Board of Directors.
-ends
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
ABOUT LIGHTNING MINERALS
Lightning Minerals is a mineral exploration company, listed on the Australian Stock Exchange (ASX:L1M) and focused on the
exploration of critical minerals and lithium at its tenements across Western Australia. The Company’s flagship Dundas project is
located in the prolific Dundas region of Western Australia. The Company also has other projects in Western Australia, Mt Jewell,
Mt Bartle and Mailman Hill prospective for base metals and critical minerals.
FORWARD LOOKING STATEMENTS
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements
can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”,
“anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans,
strategies and objectives of management, anticipated production or construction commencement dates and expected costs or
production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the
Company’s actual results, performance and achievements to differ materially from any future results, performance or
achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations
and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and
project development, including the risks of obtaining necessary licences and permits and diminishing quantities or grades of
reserves, political and social risks, changes to the regulatory framework within which the Company operates or may in the future
operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial
relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial,
market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the
future. The Company does not give any assurance that the assumptions on which forward looking statements are based will
prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other
factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ
materially from those disclosed in forward looking statements, there may be other factors that could cause actual results,
performance, achievements or events not to be as anticipated, estimated or intended, and many events are beyond the
reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking
statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations
under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake
any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions
or circumstances on which any such statement is based.
COMPETENT PERSONS STATEMENT
The information contained herein that relates to exploration results is based on information compiled or reviewed by Mr Jarrad
Woodland, who is a Competent Person and a member of the Australasian Institute of Mining and Metallurgy. Mr Woodland is a
full-time employee of the company. Mr Woodland has sufficient experience which is relevant to the style of mineralisation and
types of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Persons as defined in
the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr
Woodland consents to the inclusion of his name in the matters based on the information in the form and context in which it
appears. Mr Woodland holds options in Lightning Minerals.
The Company confirms that it is not aware of any new information or data that materially affects the information included in the
original market announcements, and that all material assumptions and technical parameters have not materially changed. The
Company also confirms that the form and context in which the Competent Person’s findings are presented have not been
materially modified from the original market announcement.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
APPENDIX 1: DUNDAS – JORC CODE 2012 TABLE 1 CRITERIA
The Table below summarises the assessment and reporting criteria used for exploration results for the Dundas Exploration Project and reflects the guidelines in Table 1 of The Australasian Code
for the Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC 2012 Code).
SECTION 1 - SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate to
the minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
•
Method of recording and assessing core and chip sample recoveries
and results assessed. Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain
of fine/coarse material.
•
Drilling techniques
Drill sample recovery
Logging
Commentary
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical studies.
•
•
•
•
•
•
•
•
•
•
•
•
•
Reverse Circulation (RC) drilling samples are collected at 1m intervals from beginning to end of each RC hole. These samples
are placed into a HDPE bag and kept at each drill site location. A 2-3kg sample is split via a rig mounted cone splitter into a
numbered calico bag to provide representative drill sample for laboratory analysis.
Aircore (AC) drilling samples are collected at 1m intervals from the beginning to the end of each AC hole. Drill sample piles
are placed in an orderly fashion on the drill site pad. When impenetrable lithologies are intersected a 90mm hammer is
used to re-enter the hole to continue drilling. When the hammer is used, a 2-3kg samples are taken from a cone splitting
device to provide drill sample for laboratory analysis. Composite sampling of the Aircore samples are collected with a tube
spear at 4m composite sample intervals to an approximate weight of 2-3kg.
Samples submitted to the analytical laboratory are at the discretion of the representative geologist.
Sample quality was supervised with no material sample loss or excess moisture recorded.
Sampling was carried out using Lightning Minerals procedures and QAQC processes as per current industry standard
practice.
Drillhole collars are located using a Garmin Map 62s handheld device.
RC drilling used a percussion face sampling hammer of 105mm diameter, collecting chip samples at 1m intervals with
each 1m pile placed into a HDPE bag on the drill site pad.
AC drilling used an aircore blade drill bit of 90mm diameter, collecting samples at 1m intervals, with the drill sample
being placed onto the drill site pad. When impenetrable lithologies are intersected by the rotation blade bit, a 90mm
percussion hammer is used to re-enter the hole to continue drilling.
Sample quality and % recoveries are recorded as a visual estimate percentage as part of the field drill rig geologist’s rig
data capture template.
Recoveries remained relatively consistent throughout the program.
The drill cyclone is cleaned frequently when drilling material that adheres to the cyclone out perimeter, and as required
when drilling harder lithologies that generate coarse rock chips.
Care was taken to ensure calico samples were of consistent volume and weight.
Samples are representative of the drilled intervals.
All drillholes are geologically domain logged by suitably experienced and qualified geologists.
Logging is both quantitative and qualitative in nature, including lithology, mineralisation, mineralogy, weathering, and
colour. Logging is of a standard able support future resource studies should they be required.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
Sub-sampling techniques
and sample preparation
Quality of assay data and
laboratory tests
Verification of sampling
and assaying
Location of data points
Data spacing and
distribution
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
•
•
•
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations used
in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A representative washed chip sample for each one-metre interval as placed in a chip tray for future reference.
Photographs are taken of chip trays for each drillhole and stored on L1M company servers.
The field lithological logging and subsequent reporting of pegmatites are not indicative of economic pegmatite hosted
mineralisation. Further exploration work including an assessment of the current drill sampling results and follow up
drilling and sampling will be required to confirm the presence of any mineralisation.
A 2-3kg sample is split via cone splitter into a numbered calico bag to provide drill sample for laboratory analysis. This occurs
for both the RC and AC programs.
All reported samples are analysed at Nagrom Laboratories, samples are dried to 105C°, crushed to nominal top-size of
6.5mm in a Terminator Jaw crusher using method CRU01. Pulverised up to 3 kg in a LM5 pulveriser mill at 80% or better
passing 75μm, using method PUL01. If the sample is greater than 3 kg, the sample is dried, and split with rotary splitter
before analysis.
Industry standard QAQC practices of duplicate and blank sampling, and the appropriate use of Certified Reference Material
for LCT pegmatite mineralisation are used for all laboratory sample submissions. CRM’s are utilised by the company at a
rate of 1:25 samples.
Samples, including QA/QC samples, have been processed by Nagrom Perth, Perth Western Australia.
Methods utilised for Lithium and Tantalum analysis are ICP004 using Aluminium Crucibles and a Mass Spectrometry (MS)
finish (detection limit of 10ppm and 1ppm for Li and Ta respectively). Review of QA/QC, including blanks, field duplicates,
high-grade and low-grade CRM’s has been completed with no issues interpreted from results. All sampling has rigorous
QAQC in terms of reference sampling as well as blank and standards introduced into the sample steam.
Each prepared sample is fused with sodium peroxide and digested in dilute hydrochloric acid. The resultant solution is
analysed by ICP. This method involves total dissolution of the sample and is useful for mineral matrices that may resist acid
digestions.
The CP independently verified drilling, sampling, assay and logging results from a validated, externally maintained and
stored geological database.
No adjustments to assay data have been performed. The CP has verified the drill collar, assay and assay QAQC data.
Handheld Garmin GPS instruments were used to geo locate each drill collar, these instruments are understood to be
accurate within a nominal ±5m in the horizontal and vertical planes.
The level of topographic control offered by a handheld GPS is considered sufficient for early exploration drilling.
All samples were collected in the Geocentric Datum of Australia 1994 (GDA94) system. (MGA94, Zone 51)
The drillhole spacing is considered appropriate for the reporting of the exploration results.
No Mineral Resource or Ore Reserve Estimates have been completed.
One-metre downhole RC drill chip samples were prepared for sample submission
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
•
Sample security
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
The measures taken to ensure sample security.
•
The chain of custody for sampling procedures and sample analysis was managed by the rig geologists during drilling.
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
•
No audits or reviews of sampling techniques have been conducted to date.
Orientation of data in
relation to geological
structure
•
•
One-metre downhole AC drill chip samples were composited to 4m via tube spear and prepared for sample submission
The drilling of pegmatite units was targeted as best possible at this early stage of exploration activities. Field modifications
were made as best possible to intercept pegmatite perpendicular to the dip plane as per industry best practice.
New or poorly understood pegmatite units were targeted from opposing directions in order to establish a representative
intercept.
SECTION 2 - REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Commentary
Mineral tenement and
land tenure status
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration done by other Acknowledgment and appraisal of exploration by other parties.
parties
•
•
•
•
•
•
•
•
Geology
Deposit type, geological setting and style of mineralisation.
•
•
•
Drill hole Information
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o
easting and northing of the drill hole collar
•
•
The Dundas Projects are located ~600km east of Perth and 20 to 50 km ENE of Norseman in Western Australia.
The Dundas Project area totals ~450km2 and comprises eight granted exploration licences separated into two exploration
areas – Dundas North (E28/3027 and E28/3028) and Dundas South (E15/1748, E63/1932, E63/1993, E63/2000, E63/2001,
and E63/2028)
The Tenements are covered by the Ngadju Determined Native Title Claim (WCD2014/004). An agreement is in Place
between the Ngadju Native Title Aboriginal Corporation RNTBC and Lightning Minerals.
The Tenements are considered in good standing at the time of this report.
The Dundas South Project area has been explored predominantly for gold and nickel by various prior parties.
More recent exploration has included a focus on Lithium via explorers such as Matsa Resources (2008-2018), West
Resource Ventures (2018 – 2019), and Liontown Resources (2018-2020).
The result of this work is described in numerous publicly available Geological Society of Western Australia publications.
Review of the considerable historic exploration activities has been completed; data is collated into company databases as
per industry standard data collection practice.
No known mineral deposits occur within project tenure.
The mineralisation style related to this release are metal
Share your feedback
Discover