HIGH-GRADE TUNGSTEN ASSAYS CONFIRM EXTENSIVE MINERALISATION
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
4 June 2026
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 1
HIGH-GRADE TUNGSTEN ASSAYS CONFIRM EXTENSIVE
MINERALISATION AT THE WARBY PROJECT IN NORTH
QUEENSLAND
HIGHLIGHTS
• Initial rock chip assay results from historical tungsten workings at the 100%-owned
Warby Project confirm widespread high-grade tungsten mineralisation across
multiple wolframite-bearing vein systems within a 2km structural corridor.
• Assays returned tungsten values ranging from 750ppm W to over 50,000ppm W
(>5% W), with:
o 10 samples grading greater than 1% W
o 6 samples grading greater than 3% W
• Prominent assay results (using High Grade REE by fusion/ICPMs) include*:
o >50,000ppm W (>5% W) from historical tailings material associated with
hand-sorted wolframite-rich quartz vein material (Sample 105495)
o 43,200ppm W (4.32% W) from quartz vein material (Sample 105496)
o 42,900ppm W (4.29% W) from quartz vein material (Sample 105499)
o 40,300ppm W (4.03% W) from quartz vein material (Sample 105878)
o 39,800ppm W (3.98% W) from quartz vein material (Sample 105500)
• Elevated bismuth, tin and copper values associated with tungsten mineralisation
support the prospectivity of the Warby system.
In Q3 follow-up mapping and geochemical sampling will be undertaken to define the
extent and characteristics of tungsten mineralisation at Warby.
Lightning Minerals Limited (ASX: L1M or “the Company”) is pleased to announce high-
grade tungsten assay results from initial reconnaissance rock chip sampling at its 100%-
owned Warby Project in North Queensland, located approximately 25 kilometres north of
Mount Surprise.
The assay results follow the Company’s ASX announcements dated: 19 May 2026 titled
“Significant Tungsten Potential Identified at the Warby Project in North Queensland,
Supports Tenure Prospectivity” and 22 May 2026 titled “Supplementary Information – Warby
Project Tungsten Announcement”.
The initial assay program has confirmed significant tungsten mineralisation associated with
a northwest-trending structural corridor extending for approximately 2 kilometres.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 2
Fourteen rock chip samples collected from eight individual vein systems returned highly
anomalous tungsten values ranging from 750ppm W to greater than 50,000ppm W (>5%
W). The tungsten mineralisation is associated with quartz veining, greisen and altered
granite.
Importantly, tungsten mineralisation was identified not only within quartz veins but also
within altered granitic host rocks and greisen material, supporting the potential for a
broader intrusive-related mineralised system.
Chief Executive Officer, Troy Brice commented:
“The initial assay results are a strong outcome from our first-pass work at Warby and confirm
widespread high-grade tungsten mineralisation across multiple historical workings.
This gives us confidence there is considerable scope to define the scale and continuity of
the mineralisation. We’re looking forward to our follow-up field exploration aimed at
expanding our understanding of the broader tungsten system at Warby.”
Planned Exploration Activities
In Q3 2026, the Company intends to undertake follow-up exploration programs aimed at
defining the broader footprint and continuity of tungsten mineralisation at Warby.
Planned activities include:
• infill drainage geochemistry;
• systematic soil geochemical sampling;
• detailed geological mapping;
• extension sampling of historical workings; and
• assessment of drill-ready targets.
Geological Setting and Sample Locations
The tungsten mineralisation occurs within a northwest-trending structural corridor hosted
within the Meso-Proterozoic Lyndbrook Complex adjacent to the Angor Granite, which
forms part of the O’Briens Creek Supersuite.
The O’Briens Creek Supersuite is recognised regionally as a significant host of tin-tungsten
mineralisation in North Queensland. Reconnaissance mapping identified multiple shallow
historical workings interpreted to date from the early 1900’s. The workings are generally
shallow, collapsed and heavily vegetated, preventing accurate determination of vein
widths, strike lengths or orientations during the initial field program.
Samples were collected from eight known vein systems covering an area of approximately
1 square kilometre within the broader 2-kilometre-long northwest-trending structural
corridor.
The Company considers that limited outcrop exposure and dense vegetation cover may
conceal additional mineralised veins or extensions within the broader target area.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 3
The map in Figure 1 outlines sample locations, historical workings and published geology
at the Warby Tungsten Project showing the northwest-trending structural corridor and
relationship to the Angor Granite and O’Briens Creek Supersuite.
Figure 1 – Warby Tungsten Project – Location Map and Geology
Assay Results Summary
A total of 14 rock chip samples were collected from historical dump material associated
with eight mapped vein positions during field activities completed in May 2026.
Samples were submitted to ALS Laboratories in Townsville for assay using Au-AA26 for gold
analysis, ME-MS61 for base metals and ME-MS81h fusion methods for refractory elements
including tungsten and tin.
The initial sampling program was designed to determine the presence or absence of
tungsten mineralisation associated with historical workings identified during
reconnaissance field mapping. The assay results confirmed significant tungsten
mineralisation across all sampled vein systems.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 4
Table 1. Excerpt from ALS Final Report certificate TV26168418, dated 1 June 2026
see Appendix full table 1* **
Sample Coord mE Coords mN Vein Lithology
Tungsten
(ppm W)
Tungsten (%
W)
105491 189992 8028264 1 Breccia 8800 0.88%
105492 189992 8028264 1 Vein Quartz 1815 0.18%
105493 189283 8028316 2 Vein Quartz 12800 1.28%
105494 189283 8028316 2 Biotite Griesen 750 0.08%
105495 189283 8028316 2 Tailings** >50000 -
105496 189215 8028196 3 Vein Quartz 43200 4.32%
105497 189215 8028196 3 Vein Quartz 20400 2.04%
105498 189215 8028196 3 Altered granite 30400 3.04%
105499 189314 8027987 4 Vein Quartz 42900 4.29%
105500 189573 8027843 5 Vein Quartz 39800 3.98%
105877 189513 8027795 6 Vein Quartz 10750 1.08%
105878 189513 8027795 6 Vein Quartz 40300 4.03%
105879 189721 8027804 7 Vein Quartz 11000 1.10%
105880 189790 8027645 8 Vein Quartz 32700 3.27%
*ALS Analysis Procedure ME-MS81h: High Grade REE by fusion /ICPMS. REEs may not be
totally soluble in this method.
**Samples above include field sample coordinates and lithology. Sample should be
considered on their own merits. Further field work and sampling is needed to verify any
significance,
The Company notes that the current sampling program represents an early-stage
reconnaissance assessment of historical dump material and is not necessarily
representative of in-situ mineralisation grade, continuity or scale.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 5
The Company further cautions that rock chip samples are selective in nature and may not
represent average grades or continuity of mineralisation within the broader system.
Geological Interpretation
Geological logging and assay results indicate at least two distinct generations of tungsten-
bearing quartz veins are present:
1. Early-stage brecciated quartz veins characterised by fractured and brecciated milky
quartz containing wolframite associated with elevated copper, tin and local gold
anomalism.
2. Later-stage quartz veins comprising glassy to translucent quartz hosting coarse
bladed and euhedral wolframite crystals with only weak associated Bi.
The Company notes that significant tungsten mineralisation was also recorded within
weakly brecciated pegmatitic granite and greisen material.
Sample 105498 returned 30,400ppm W (3.04% W) from altered pegmatitic granite
containing wolframite associated with coarse biotite-rich zones.
Sample 105494, collected from biotite greisen material, returned 750ppm W and displayed
weakly elevated lithium and rare earth element signatures.
Importantly, the occurrence of wolframite mineralisation within altered pegmatitic granite
and greisen, in addition to discrete quartz veins, may indicate a larger hydrothermal
tungsten system associated with intrusive activity within the O’Briens Creek Supersuite.
These observations support the potential for broader intrusive-related tungsten
mineralisation extending beyond discrete quartz veins.
Moderate to elevated bismuth values were also observed in association with tungsten
mineralisation across multiple samples, while anomalous tin values of up to 8,800ppm Sn
and elevated copper values were identified within selected brecciated vein systems.
Mineralisation Photographs
The Company notes that visible wolframite mineralisation observed during field activities
was subsequently validated by laboratory assay.
Visual observations included coarse acicular, tabular and euhedral wolframite crystals
hosted within quartz vein material and altered granite.
Type 2 High grade Tungsten Mineralisation from Vein 3 (see Figure 2)
Sample 105496 returned 43,200ppm W (4.32% W) from quartz vein material containing
coarse tabular and acicular wolframite crystals.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 6
Figure 2. Sample no 105496. Vein no 3 (4.32% W). Close-up of acicular wolframite to
3cms in Type 2 glassy vein quartz
Wolframite hosted within altered pegmatitic granite (Figure 3)
Sample 105498 returned 30,400ppm W (3.04% W) from weakly brecciated pegmatitic
granite containing wolframite associated with coarse biotite-rich zones. Sample also
displays weakly elevated REE, probably monazite.
Figure 3 Sample no 105498 (3.04% W). Vein no 3. Field of view approximately 22cm.
Coarse patches of biotite and wolframite within a coarse weakly brecciated pegmatitic
granite.
Type 1 Tungsten Mineralisation (Figure 4)
Vein 6 displays evidence of multiple mineralisation stages including early wolframite
mineralisation subsequently brecciated and overprinted by later mineral phases including
malachite and limonite.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 7
Figure 4. Sample no 150877. Vein no 6. Field of view approximately 8cm. Sawn
specimen showing early euhedral wolframite in white vein quartz subsequently
fractured and brecciated with fractures and voids infilled by limonite with malachite
and rare azurite as well as phase 2 wolframite as anhedral masses.
Historical Workings and Exploration Potential
Low-level anomalous tungsten identified in historical regional drainage sampling east of
the current workings further supports the potential for additional tungsten-bearing vein
systems within the project area.
Importantly, no evidence of modern systematic tungsten exploration has been identified
across the current target area.
The Company is strongly encouraged to undertake further systematic exploration, due to
the below criteria.
• widespread high-grade tungsten mineralisation;
• multiple mineralised vein systems;
• intrusive-hosted tungsten mineralisation;
• associated greisen alteration; and
• favourable regional geological setting
About Tungsten
Tungsten is classified as a critical mineral by several Western governments due to its
strategic importance across industrial manufacturing, infrastructure and defence
applications.
Tungsten is widely used in cutting tools, drill bits, aerospace alloys, armour-piercing
applications and advanced industrial manufacturing due to its exceptional hardness and
high melting point.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
ASX: L1M
ABN. 40 656 005 122 8
Recent market commentary has highlighted tightening global tungsten supply conditions
following export restrictions imposed by China, which remains the dominant global
supplier of processed tungsten products.
The Company notes increasing industry and government focus on securing alternative
tungsten supply sources from stable Western jurisdictions amid expectations of ongoing
structural supply constraints in global tungsten markets.
JORC CODE TABLE 1
The JORC Code Table 1 applicable to the Warby Project tungsten rock chip sampling
program referred to in this announcement is unchanged from the Company’s
supplementary ASX announcement dated 22 May 2026 titled “Supplementary Information
– Warby Project Tungsten Announcement” and continues to apply.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
9
ASX: L1M
ABN. 40 656 005 122
APPENDIX 1
Table 1. ALS Final Report certificate TV26168418 dated 1 June 2026*
*Analysis Procedure ME MS81h: High Grade REE by fusion /ICPMS. REEs may not be totally soluble in this method.
SAMPLE Ce Dy Er Eu Gd Hf Ho La Lu Nb Nd Pr Rb Sm Sn Ta Tb Th Tm U W Y Yb Zr
DESCRIPTION ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
105491 11 3.7 2.4 1.1 3.3 <1 0.71 6 0.31 2 9.9 2.1 9 2.5 3280 <0.5 0.56 0.8 0.36 12.8 8800 21 2.2 30
105492 5 0.4 0.2 <0.2 0.6 <1 0.07 <3 <0.05 6 2.1 0.6 77 0.6 177 <0.5 0.07 1.2 <0.05 0.9 1815 <3 0.3 10
105493 5 0.6 0.7 0.2 0.5 <1 0.18 <3 0.13 5 1.9 0.5 12 0.4 <5 <0.5 0.09 <0.3 0.15 <0.3 12800 4 1.5 <10
105494 186 3.7 1.2 1.4 8.3 12 0.5 89 0.2 24 82.9 22.5 329 13.7 93 0.8 0.83 29.1 0.16 2.9 750 12 1 460
105495 11 2.3 2.6 1.2 1.3 <1 0.59 5 0.95 24 5.3 1.2 13 0.7 <5 <0.5 0.27 0.4 0.58 0.5 >50000 13 5.3 <10
105496 3 1.1 2.2 0.5 0.5 <1 0.39 <3 0.69 27 1.5 0.4 2 0.3 <5 <0.5 0.09 <0.3 0.37 <0.3 43200 9 4.1 <10
105497 3 0.9 1 0.2 0.5 <1 0.22 <3 0.28 20 1.5 0.3 6 0.4 <5 <0.5 0.11 0.3 0.21 0.4 20400 6 1.7 10
105498 47 13.2 10.2 1.8 7.9 1 3.16 24 1.74 21 22 6 415 5.9 19 0.9 1.74 7.7 1.68 2.8 30400 89 11.4 20
105499 <3 1 1.5 0.4 0.6 <1 0.4 <3 0.4 25 1.5 0.3 5 0.3 <5 <0.5 0.1 <0.3 0.28 <0.3 42900 8 3.1 <10
105500 3 1.5 1.4 0.6 0.5 <1 0.32 <3 0.2 1 2.1 0.4 3 0.6 <5 <0.5 0.17 <0.3 0.15 0.3 39800 7 1.6 <10
105877 6 2.3 2 0.8 1.7 <1 0.56 3 0.34 4 3.7 0.6 39 1 945 <0.5 0.32 <0.3 0.33 3 10750 19 2.5 <10
105878 4 1.4 1.4 0.5 1 <1 0.38 <3 0.36 10 2.6 0.5 9 0.7 209 <0.5 0.21 <0.3 0.24 1.4 40300 7 2.6 <10
105879 3 0.7 0.6 0.3 0.4 <1 0.19 <3 0.08 2 1.2 0.2 56 0.2 57 <0.5 0.14 <0.3 0.08 <0.3 11000 5 0.8 <10
105880 9 1.7 1.2 0.9 1.2 <1 0.4 5 0.35 8 5.1 1.4 19 1.1 316 <0.5 0.26 0.4 0.23 0.9 32700 6 1.9 <10
Certificate of Analysis TV26168418, Analysis Procedure ME-MS81h, High Grade REE by fusion /ICPM. REEs may not be totally soluble in this method
9
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
10
ASX: L1M
ABN. 40 656 005 122
~ Ends ~
This announcement has been authorised for release by the Board of Lightning Minerals
Limited.
For more information, please visit: lightningminerals.com.au
Enquiries in relation to the announcement, please contact:
Lightning Minerals Ltd (ASX: L1M) Corporate Storytime
Troy Brice Paul Berson
Chief Executive Officer Investor & Media Relations
Phone +61 8 9429 8806 Phone +61 421 647 445
admin@lightningminerals.com.au paul@corporatestorytime.com
About Lightning Minerals Ltd (ASX: L1M)
Lightning Minerals Limited is an Australian exploration and development company focused
on advancing a portfolio of gold and copper assets in Tier 1 mining jurisdictions.
The Company’s flagship asset is the wholly owned Mt Turner Gold Project in northern
Queensland, which hosts a large-scale gold system extending over approximately 14km of
strike along the prospective Drummer Fault. Mt Turner is the primary focus of exploration,
with ongoing drilling aimed at progressing the project toward resource definition and
development.
Lightning Minerals also holds a pipeline of gold and copper projects across Australia,
including assets in the Lachlan Fold Belt in New South Wales and the Eastern Goldfields of
Western Australia, providing additional exploration upside and growth opportunities.
The Company’s objective is to create long-term shareholder value through disciplined
exploration, resource growth and the development of high-quality mineral assets.
A. 32 Harrogate Street, West Leederville, Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.au
lightningminerals.com.au 11
ASX: L1M
ABN. 40 656 005 122
Location of Lightning Minerals Australian Gold and Copper Projects
A. 32 Harrogate Street, West Leederville, Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.au
lightningminerals.com.au 12
ASX: L1M
ABN. 40 656 005 122
FORWARD LOOKING STATEMENTS
Information included in this release constitutes forward-looking statements. Often, but not always, forward
looking statements can generally be identified by the use of forward-looking words such as “may”, “will”,
“expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may
include, without limitation, statements regarding plans, strategies and objectives of management, anticipated
production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that
may cause the Company’s actual results, performance and achievements to differ materially from any future
results, performance or achievements. Relevant factors may include, but are not limited to, changes in
commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and
demand for production inputs, the speculative nature of exploration and project development, including the
risks of obtaining necessary licences and permits and diminishing quantities or grades of reserves, political and
social risks, changes to the regulatory framework within which the Company operates or may in the future
operate, environmental conditions including extreme weather conditions, recruitment and retention of
personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating
to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s
business and operations in the future. The Company does not give any assurance that the assumptions on which
forward looking statements are based will prove to be correct, or that the Company’s business or operations will
not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company
or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events
or results to differ materially from those disclosed in forward looking statements, there may be other factors that
could cause actual results, performance, achievements or events not to be as anticipated, estimated or intended,
and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not
to place undue reliance on forward looking statements. Forward looking statements in these materials speak
only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock
exchange listing rules, in providing this information the Company does not undertake any obligation to publicly
update or revise any of the forward-looking statements or to advise of any change in events, conditions or
circumstances on which any such statement is based.
COMPETENT PERSONS STATEMENT
The information contained herein that relates to exploration results is based on information compiled or
reviewed by Mr Lee Spencer, who is a Competent Person and a member of the Australasian Institute of Mining
and Metallurgy. Mr Spencer is a contractor to the Company. Mr Spencer has sufficient experience which is
relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is
undertaking to qualify as a Competent Persons as defined in the 2012 Edition of the ‘Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Spencer consents to the inclusion of
his name in the matters based on the information in the form and context in which it appears. Mr Spencer holds
options in Lightning Minerals.
REFERENCES TO PREVIOUS ANNOUNCEMENTS
The Company confirms that it is not aware of any new information or data that materially affects the
information included in the original market announcements, and that all material assumptions and technical
parameters have not materially changed. The Company also confirms that the form and context in which the
Competent Person’s findings are presented have not been materially modified from the original market
announcement.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
13
ASX: L1M
ABN. 40 656 005 122
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data - Mt Turner Project
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where there
is coarse gold that has inherent sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may warrant disclosure of
detailed information.
• Samples were secured as random chip samples of vein and wall rock material
from historical waste dumps as a key geochemical tool in the early exploration
phase.
• Approximately 2 kilograms of material were obtained per sample and sent for
preparation and assay via an industry standard procedure
• Samples were secured to determine the presence or absence of tungsten
mineralization within dump material.
• Sampling followed a well - documented protocol and quality was considered
to be of good industry standard.
• Rock chip samples will not be included in a dataset for any future resource
estimation
Drilling
techniques
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
• Not Applicable
Drill sample
recovery
• Method of recording and assessing core and chip sample recoveries and
results assessed.
• Measures taken to maximise sample recovery and ensure representative
nature of the samples.
• Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
• Not Applicable
Logging • Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean,
• Random chip samples were qualitatively logged as to the presence or absence
of mineralization, lithology and any alteration of the host rock. Samples were
photographed during logging for reference.
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
14
ASX: L1M
ABN. 40 656 005 122
Criteria JORC Code explanation Commentary
channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/second-
half sampling.
• Whether sample sizes are appropriate to the grain size of the material being
sampled.
All samples were taken dry
All comminution and splitting was conducted at the assay laboratory using Jaw
crushers, mills and Jones-type riffle splitters.
Sampling procedures included sampling a number of quartz vein rocks per
sample from the dump material to represent as much as possible the rock type
being sampled. No excavations were made into the dump so samples represent
what was exposed at surface.
Sample size is industry standard for the type of rock and mineralisation being
sampled.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been established.
• Samples were submitted to ALS Laboratory in Townsville using certified
methods and instruments. Methods used for assay data include AA-26,ME-MS -
61 and ME -MS-81h.
• ALS carry out internal check as per their standard operating procedure. This
results in around 10% of the total samples received being independently
assayed as internal QA/QC.
Verification of
sampling and
assaying
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Primary data is recorded in the field and transferred to spreadsheets and
uploaded to the company’s electronic data filing system.
• Assays are received from the Laboratory in excel format and appended to field
data. Deviations of assays from observed mineralization are re-assayed.
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and down-
hole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• All sample locations are recorded by gps and entered into field notes
• Grid system is UTM WGS 84 Zone 55
• For rock chip samples elevation data is recorded from the gps
A. 32 Harrogate Street, West Leederville Perth WA 6007
T. +61 (08) 9429 8806
E. admin@lightningminerals.com.au
lightningminerals.com.au
15
ASX: L1M
ABN. 40 656 005 122
Criteria JORC Code explanation Commentary
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
• Whether sample compositing has been applied.
• Data spacing was dependant on the location of historical workings
• The current spacing of sampling would not be sufficient to establish any
degree of continuity. Further grid based sampling or drilling would be
required to fulfill grade and geological continuity.
• No compositing has been applied
Orientation of
data in
relation to
geological
structure
• Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias,
this should be assessed and reported if material.
• Sampling of dump material is inherently biased as the location of original in-
situ material is unknown.
Sample
security
• The measures taken to ensure sample security. • Chief measure to ensure sample security was the adoption of an internal chain
of custody. Samples were delivered from the field and delivere
Share your feedback
Discover