Intersections up to 94m Width at Esperanca Project in Brazil
Released
Released
Announcement PDF
Intersections up to 94m Width at Esperança Project in
Brazil
ASX Announcement
26 September 2025
Lightning Minerals (L1M or the Company) is pleased to provide an update on its inaugural drilling campaign
at its Esperança lithium project in the prolific Lithium Valley region of Minas Gerais, Brazil. The inaugural
drilling campaign has now been completed with a total of 1,442m drilled and assays received from the SGS
GEOSOL laboratory in Belo Horizonte Minas Gerais Brazil.
Drilling has confirmed the presence of a pegmatite system in the locality. Low lithium grades have been
encountered but geochemical analysis and vectoring will be utilised to determine correct fractionation and
potential lithium source. Drilling was expedited on the Esperança project area following the discovery of
spodumene at Esperança in artisanal workings (ASX Announcement 18 November 2024) and subsequent
confirmation of spodumene through Raman Spectroscopy (ASX Announcement 17 January 2025). Soil
sampling programs at the Esperança, Caraíbas and Canabrava projects have provided peak soil assays of up
to 429ppm lithium at Caraíbas, 320ppm lithium at Canabrava and multiple target areas for follow up detailed
surface mapping across all three project areas.
HIGHLIGHTS
•
Drilling of the 14 diamond drill holes is now complete at the Esperança project for a total
of 1,442m
•
Multiple downhole pegmatite intersections have been recorded, the thickest downhole
intercept is in DHLM010 with 94.62m (true width estimated at ~80m)
•
9 of 14 holes drilled have intersected significant zones of pegmatite, intercepts over 25m
downhole include:
o
Hole DHLM001: Downhole pegmatite intersection of 26.20m from 1.60m
o
Hole DHLM002: Downhole pegmatite intersection of 22.35m from 27.15m
o
Hole DHLM004: Downhole pegmatite intersection of 30.05m from 2.05m
o
Hole DHLM005: Downhole pegmatite intersection of 45.58m from 5.10m
Hole DHLM007:
Downhole
pegmatite intersection
of 19.08m
l 6 505 Little CollinsoSt Melbourne
VIC 3000 Australia
| admin@lightningminerals.com.au
| (08)
9429 8806from 5.95m
o
Hole DHLM008: Downhole pegmatite intersection of 39.90m from 6.88m
o
Hole DHLM009: Downhole pegmatite intersection of 47.69m from 55.75m
o
Hole DHLM010: Downhole pegmatite intersection of 94.62m from 59m
o
Hole DHLM011: Downhole pegmatite intersection of 18.65m from 77.55m
•
The drill hole geochemistry in association with follow up reconnaissance mapping will
guide the next round of drilling, vectoring towards additional spodumene bearing
pegmatites on the Esperança Project
•
Reconnaissance mapping and rock sampling vectoring towards spodumene bearing
pegmatites on the Caraíbas and Canabrava Projects
•
Drilling underway at the Company’s Mt Turner project in Queensland targeting gold and
siler mineralization along the 14km Drummer Fault
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Lightning Minerals Managing Director Alex Biggs said, “Early indictors at Esperança are promising that we
are potentially close to a lithium system. Intersecting pegmatites is important as these lithologies are what
typically host lithium bearing spodumene. It’s also worth noting the significant downhole thickness up to 94m.
We know we have spodumene at Esperança based on our discovery in November 2024; we are now trying
to vector in on a source and economic concentrations. We look forward to continuing our works and evolving
our exploration thesis through geochemical analysis and vectoring of our assays. Vectoring is an important
process in determining the state of fractionation and future targeting. Having information at depth as well as
surface data increases our chances of locating lithium bearing pegmatites. We are currently completing
drilling at our Mt Turner project in Queensland targeting gold and silver mineralisation along the 14km
Drummer Fault. As the Company evolves we are excited to be involved in the gold, silver and copper sectors
in Australia and with our Brazil focus on lithium this provides some optionality on the future electrification and
battery thematic. Partitioning of the Company in this way provides our investors the opportunity to benefit
from two of the most relevant thematics in the mining sector today”.
Multiple Pegmatite Intersections up to 94m at Esperança Project
The inaugural drill program at the Esperança Project completed 1,442m of diamond drilling, with nine of the
fourteen holes intersecting significant zones of pegmatites. A full table of collar locations is available in
Appendix 1 – Table 1. Mineralogy consists of a feldspar-quartz-muscovite pegmatite mineral assemblage,
hosted within schists of the Salinas Formation. A full table of geological descriptions is available in Appendix
2 – Table 2 and drill hole laboratory assay results available in Appendix 3 - Table 3 showing lithium grades.
Figure 1: Plan view of drill locations and identified pegmatite trend at the Esperança project
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Figure 2: Cross section of drillholes DHLM001, 002, 007, 008, and 009 at the Esperança project
Figure 3: Cross section of drillhole DHLM005 and DHLM010 at the Esperança project
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Thesis Development - Esperança Project
Thick Pegmatite Intersections Demonstrate Potential
The Company’s inaugural drill program at Esperança was developed following the discovery of lithium
bearing spodumene in artisanal workings in November 2024 (ASX Announcement 18 November 2024 and
ASX Announcement 17 January 2025). Drilling was planned to test for pegmatites along strike from the
artisanal workings and to further test the lithium in soil anomalies previously identified across the Esperança
project area (ASX Announcement 17 January 2025).
Drilling at Esperança has now been completed, with thirteen of the fourteen drill holes intersecting
pegmatites of significant thickness. The pre-drilling interpretation regarding the strike and dip of the
outcropping pegmatite has required modification, with changes coming during the drill program. Review of
the drilling data now suggests a south-easterly strike (115°) and shallow dip (35°-45°) to the northeast. The
drill program was modified to intersect the revised pegmatite interpretation at an approximately
perpendicular angle to the strike and dip plane of the pegmatite. The pegmatites intersected are
encouraging, with the scale of the downhole pegmatite intercepts considered a positive indicator by the local
geology team. Targeting of the mineralised portions remains as an ongoing priority with geochemical
analysis now being conducted to identify the correct fractionation point for lithium emplacement.
Orientation of Pegmatites Defined
The drill program has provided essential spatial information on the shape and orientation of the Esperança
pegmatite, suggesting the pegmatite has been truncated by a late-stage sinistral strike slip fault located
approximately 120m to the east of the spodumene discovery in the artisanal workings hosting occurrences
of spodumene minerals. The location is shown in Figure 1.
The Field geology team are focusing their reconnaissance activities to search for repeating structures on the
eastern side of the fault where the pegmatite may continue within the Esperança tenement. Focus is also on
reconnaissance to the south of the identified pegmatites to identify repeating structures that may be in a
more favourable fractionation location.
The scale of the identified pegmatites is considered encouraging however the depth of weathering has been
greater than expected, to vertical depths of up to 50m below surface. The drill program has mainly targeted
pegmatites in the top 80m from surface, with the exception of drill hole DHLM010 that intercepted
down VIC
to 3000
a depth
of 140m
below surface. This approach
l 6 505 Littlepegmatites
Collins St Melbourne
Australia
| admin@lightningminerals.com.au
| (08) 9429has
8806been deliberate to maximise near
surface identification of pegmatites and strike extent. With geochemical data now available at depth the
potential for deeper drilling is being evaluated as well as identification of pegmatites both to the east and
south of the currently drilled area.
Esperança Project Location and Prospectivity Potential
The Esperança project is considered to be of excellent prospectivity given its position proximal to fertile Stype granites within the region. The project has Palaeozoic S-type granites as mapped by the Brazilian
Geological Survey to the north, east and west of the project area (Figure 4). Lithium deposits are often
associated with these S-type granite batholiths as they are theorised to be the fundamental source for the
lithium in hard rock deposits. The granites surrounding the project are documented with ‘rich black
tourmaline and, more rarely, garnet, pink and green tourmaline and lepidolite’, the thesis is that these granites
could represent a potential source for primary hydrothermal fluids that have the correct geochemistry for
lithium formation.
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
In global context lithium deposits are usually not found within the granite themselves, but rather at a critical
distance of 1 to 12 kilometres away from the source granitic rocks. The Esperança project is located between
3-4 kilometres away from S-type granitoids which is well situated based on this thesis.
Figure 4: Esperança project location and proximity to S-Type pegmatites
Next Steps – Exploration to Continue at Esperança
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Results from drilling at Esperança are highly encouraging and warrant ongoing exploration. The scale
potential that has so far been demonstrated is a crucial component. Further identification of spodumene
mineralisation is now a priority as well as vectoring in on what may be considered as ideal fractionation
conditions for lithium emplacement. Reconnaissance and ground truthing to achieve these targets is now a
key strategic approach for the team.
Ongoing Works in Brazil
In addition to reviewing the drilling data collected across the northwest corner of the Esperança Project,
detailed field mapping and rock sampling works are continuing at the Caraíbas and Canabrava projects
where peak lithium in soil anomalism has been identified up to 429ppm lithium and 320ppm lithium
respectively. The Company aims to identify multiple drill targets that will be ready to drill when the lithium
market improves.
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Figure 5: Esperança, Caraíbas and Canabrava project location, Minas Gerais, Brazil
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Figure 6: Location of Lightning Minerals’ lithium projects in the Lithium Valley region of Minas Gerais
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Approved for release by the Board of Directors
-ENDMore information at www.lightningminerals.com.au
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
ABOUT LIGHTNING MINERALS
Lightning Minerals is a mineral exploration company, listed on the Australian Securities Exchange (ASX:L1M) and focused on
the exploration of critical minerals, lithium, and gold. The acquisition of the Caraíbas, Canabrava and Esperança lithium projects
in Minas Gerais, Brazil are potentially transformational to the Company’s success in the lithium sector. The Company also owns
the Dundas project in the prolific Dundas lithium region of Western Australia, the Dalmas and Hiver lithium projects in Quebec,
Canada, another significant and evolving lithium region globally. The Company also owns other projects in Western Australia,
Queensland, New South Wales and Victoria which are prospective for gold, base metals and critical minerals.
FORWARD LOOKING STATEMENTS
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements
can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”,
“anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans,
strategies and objectives of management, anticipated production or construction commencement dates and expected costs
or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the
Company’s actual results, performance and achievements to differ materially from any future results, performance or
achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations
and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration
and project development, including the risks of obtaining necessary licences and permits and diminishing quantities or grades
of reserves, political and social risks, changes to the regulatory framework within which the Company operates or may in the
future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel,
industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial,
market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the
future. The Company does not give any assurance that the assumptions on which forward looking statements are based will
prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other
factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ
materially from those disclosed in forward looking statements, there may be other factors that could cause actual results,
performance, achievements or events not to be as anticipated, estimated or intended, and many events are beyond the
reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking
statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations
under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake
any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions
or circumstances on which any such statement is based.
COMPETENT PERSONS STATEMENT
The information contained herein that relates to exploration results is based on information compiled or reviewed by Mr
Matthew Watson, who is a Competent Person and a member of the Australasian Institute of Mining and Metallurgy. Mr Watson
is a full-time employee of the Company. Mr Watson has sufficient experience which is relevant to the style of mineralisation and
types of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Persons as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr
Watson consents to the inclusion of his name in the matters based on the information in the form and context in which it
appears. Mr Watson holds options in Lightning Minerals.
l 6 505 Little Collins St Melbourne VIC 3000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
REFERENCES TO PREVIOUS ANNOUNCEMENTS
The Company confirms that it is not aware of any new information or data that materially affects the information included in the
original market announcements, and that all material assumptions and technical parameters have not materially changed. The
Company also confirms that the form and context in which the Competent Person’s findings are presented have not been
materially modified from the original market announcement.
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Appendix 1: Brazilian Projects – JORC Code 2012 Table 1 Criteria
The Table below summarises the assessment and reporting criteria used for exploration results for the Exploration Projects and reflects the guidelines in Table 1 of The Australasian Code for the
Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC 2012 Code).
Section 1 - Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate to
the minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
Method of recording and assessing core and chip sample recoveries
and results assessed. Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain
of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
Drilling techniques
Drill sample recovery
Logging
Sub-sampling techniques
and sample preparation
Commentary
•
Data in this document relates to results and preliminary logging of diamond drill core, all diamond drill core is NQ (48mm
diameter). No drill core has been sampled to date.
•
Diamond core samples intervals are logged for lithology, structural and geotechnical information, measured, photographed,
and placed into numbered trays prior to sampling.
•
Core is to be processed on nominal ~2m intervals (1.80– 2.20m) where possible unless geological boundaries dictate
otherwise.
•
•
Geological boundaries are crossed by sample intervals.
•
•
The same side of the core is always sampled in line with company procedure.
•
•
All holes are NQ diamond drill holes.
•
All core is depth marked and oriented to check against drillers measurements (blocks), ensuring that all core loss is
considered.
•
•
Diamond core recovery is recorded into the database.
•
Logging of diamond core records lithology, mineralogy, mineralisation, structures (core only), weathering, colour and other
noticeable features.
•
Core was photographed in both dry and wet form.
•
•
Soil Samples are collected in the field into small kraft cardboard bags and are 200gm per unit.
½ core samples are to be split by core saw, collected, and submitted for analysis to SGS Laboratories along with regular
duplicates, standards and blanks in line with QAQC procedures.
Collar site locations are recorded using a Garmin Map 62s handheld device and are reported in projection SIRGAS 2000 /
UTM 23S
A Gyro based system has been used for both rig alignment and downhole measurements on all holes.
No significant core loss has been observed to date.
Rock chip samples are approximately 1-3kg and are collected into pre numbered calico bags.
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
Quality of assay data and
laboratory tests
Verification of sampling
and assaying
Location of data points
Data spacing and
distribution
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
•
Industry standard QAQC practices and the appropriate use of laboratory provided Certified Reference Material for low level
lithium are used for all laboratory sample submissions.
•
Standards, blanks and crushed core split duplicates are utilised by the company at a rate of 1:30 samples for each control
type.
•
Diamond core was drilled with NQ size and sampled as complete half core to produce a bulk sample for analysis. Intervals
selected varied from 1.06 – 2.71m (minimum-maximum) The core is cut in half length ways just to the right of the orientation
line where available using a diamond core saw. All samples are collected from the same side of the core where practicable.
Assay preparation procedures ensure the entire sample is first crushed to >75% mass passing 3mm screen sizing, with a
250g split taken and pulverised to 75 microns, from which a sub‐sample is taken for analysis. This removes the potential for
the significant sub‐sampling bias that can be introduced at this stage.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations used
in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
•
•
•
•
No Assay data is reported within this announcement
•
Elements analysed at ppm limits for rock chip samples included Ag, Al,As, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er,
Eu, Fe, Ga, Gd, Ge, Hf, Ho, In, K, La, Li, Lu, Mg, Mn, Mo, Nb, Nd, Ni, P, Pb, Pr, Rb, Sb, Sc, Sm, Sn, Sr, Ta, Tb, Th, Ti, Tl, Tm, U,
V, W, Y, Yb, Zn, Zr.
•
•
•
Significant intersections are verified by the company in country geological staff.
•
•
No assay data has been reported; no assay adjustments have been made.
•
A Gyro based system has been used for both rig alignment and downhole measurements on all holes, hole deviation is
minimal and within acceptable tolerances.
•
The level of topographic control offered by a handheld GPS is considered sufficient for early exploration diamond drilling.
Collars will be picked up using differential GPS upon the discretion of the field geology team.
•
•
All samples were collected in the SIRGAS 2000 / UTM zone 23S, WGS84 / UTM Zone 23S
•
•
No Mineral Resource or Ore Reserve Estimates have been completed.
Data spacing for reporting of Exploration Results.
Whether the data spacing, and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Whether sample compositing has been applied.
Samples are to be submitted to SGS Geosol Laboratórios Ltd’ of Belo Horizonte Minas Gerais Brazil.
Analysis procedures are considered appropriate for Lithium and Multi element analysis.
Samples are prepared and analysed using SGS technique PRP70J and are analysed via multi spectral and optical emission
spectroscopy analysis using code ICM90A. Determination by Fusion with Sodium Peroxide - ICP OES / ICP MS.
No twinned holes have yet been completed.
Primary data is collected onto a company field laptop and includes geology, sampling and QAQC data. Data is then
transferred to company databases managed by an external contractor in Perth Western Australia.
Handheld Garmin GPS instruments were used to geo locate each sample location, these instruments are understood to be
accurate within a ±5m in the horizontal and vertical planes.
At this early stage of exploration holes are orientated as best possible to intersect targeted pegmatites. A 2m downhole
sample spacing is considered appropriate for the reporting of the exploration diamond drilling assay results.
No sample compositing has been applied.
Level 11 40 The Esplanade Perth WA 6000 Australia | admin@lightningminerals.com.au | (08) 9429 8806
•
•
The orientation of drill design and sampling data is targeted as best possible at this early stage of exploration activities.
Sample security
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
The measures taken to ensure sample security.
•
The chain of custody for sampling procedures and sample analysis was managed by the in country geological staff during
collection and core processing.
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
•
No audits or reviews of sampling techniques have been conducted to date.
Orientation of data in
relation to geological
structure
At present, no mineralised structures have been identified.
Section 2 - Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral tenement and
land tenure status
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration done by other Acknowledgment and appraisal of exploration by other parties.
parties
Geology
Drill hole Information
Data aggregation
methods
Deposit type, geological setting and style of mineralisation.
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
down hole length and interception depth,
o
hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from the
understanding of the report, the Competent Person should clearly explain
why this is the case.
In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high-grade results
and longer lengths of low grade results, the procedure used for such
•
•
•
The Esperança Project is located approximately 18km south-south east of the town of Salinas, Minas Gerais, Brazil.
•
•
•
•
The Esperança Project is at a very early stage and little to no recorded work has been completed by prior explorers.
•
•
•
The target commodity is hardrock lithium spodumene within lithium-caesium-tantalum pegmatites.
•
Exploration results are as reported by the laboratory. No weight avera
Share your feedback
Discover