Multiple Targets Identified at James Bay Lithium Projects
Released
Released
Announcement PDF
ASX Announcement
30 August 2023
Multiple Targets Identif ied at James Bay Lithium Projects
Lightning Minerals (L1M or the Company) is pleased to provide an update on its due diligence process
for the acquisition of the Dalmas and Hiver lithium Projects (the Projects) in James Bay, Quebec,
Canada. Multiple pegmatite target areas have been identified through multispectral analysis which
will form the basis of phase 1 exploration works and reconnaissance. This is a crucial step in the
Company’s due diligence process regarding the proposed acquisition of the Projects1 which once
complete will be announced to the market.
HIGHLIGHTS
o
Multispectral analysis (Sentinel 2 and ASTER satellites) has identified multiple
pegmatite target areas at the Dalmas and Hiver Projects
o
165 discreet signatures that form seven exploration target areas identified across
both projects. Target areas up to 2.7km in length at Dalmas and 2.1km in length at
Hiver
o
Results form the basis of phase 1 sampling, ground truthing and reconnaissance
which is planned to begin post deal completion
Multispectral data covering the Dalmas and Hiver Projects has been interrogated with analysis of both
Sentinel 2 and ASTER satellite data completed. Multiple areas of interest have now been identified with
a total of 165 discreet multispectral targets for follow up field investigation. The identified target areas
extend up to 2.7km in strike on the Dalmas Project and 2.1km on the Hiver Project.
The Dalmas Project area exhibits 113 potential targets, the remaining 52 targets occur within the Hiver
Project tenure. The majority of multispectral targets appear to occur in four clustered areas at Dalmas,
and three at Hiver. Identifying these target areas is a crucial step in defining a phase 1 work program
consisting of rock chip sampling and ground reconnaissance which will focus on the potential
identification of lithium bearing pegmatites. Phase 1 works are planned to begin immediately following
satisfaction of due diligence and deal completion.
Note 1: Further exploration work including the verification of historically mapped pegmatitic outcrops is necessary. The
nature of the geological outcrop mapping is currently unknown and the presence of pegmatitic lithologies does not
necessarily indicate the presence of lithium, tantalum or caesium mineralisation. Only laboratory chemical assays can
determine the presence and grade of any mineralisation.
Note 2: The Company is optimistic about concluding the transaction and acquisition of the Dalmas and Hiver Projects
outlined herein, however at the date of this announcement no assurance that the conditions precedent with respect to the
transaction will be met. Accordingly, investors are cautioned against making investment decisions based on this
announcement.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
Lightning Minerals Chief Executive Officer Alex Biggs said, “As we get closer to completing our due
diligence on the Dalmas and Hiver Projects it is fantastic to see early-stage positive exploration results
that provide a clear pathway for on ground exploration. Multispectral analysis is an excellent first step
in developing prospectivity of the project areas and has been utilised in the James Bay region recently.
These target areas now give us a starting point for exploration allowing us to effectively target areas of
interest. The acquisition of the Projects is still pending successful completion of the Company’s due
diligence but it should be noted that works are on track and positive at this stage. We look forward to
updating the market as soon as due diligence is finalised”.
DALMAS PROJECT - TARGET GENERATION
The Dalmas Project is located in the James Bay region of Quebec approximately 150km to the east of
Patriot Battery Metals’ (ASX: PMT) Corvette lithium project and 45km to the east of Winsome Resources’
(ASX: WR1) Adina lithium project. Within the Dalmas Project area 113 discreet multispectral signatures
have been identified, which broadly form four clustered areas for follow up investigation (Figures 1 and
2). These signatures have the potential to represent lithium-caesium-tantalum (LCT) pegmatites. Field
verification will be conducted during the phase 1 work program phase.
Figure 1: Dalmas project with identified multispectral pegmatite targets (red outlines) on Sentinel 2
composite image.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
Figure 2: Dalmas project with identified multispectral pegmatite targets (red outlines) on Sentinel 2
composite image and 1:2,000,000 QGS interpreted bedrock geology.
The Dalmas project geology is interpreted by Quebec Geological Survey (QGS) at a 1:2,000,000 scale,
this can be summarised at a project scale as felsic intrusive lithologies (granite/tonalites) juxtaposed
against greenstone and metasedimentary units. The Quebec Geological Survey historic outcrop
mapping information is also displayed in Figure 2, with previously mapped outcropping pegmatitic
lithologies occur at three of the four priority areas. These sites will be visited as a priority during the
phase 1 work program for verification. The prospect scale relationship between the geological setting,
the QGS mapped pegmatitic outcrops and the potential for LCT pegmatite mineralisation will be a
focus for field investigations.
HIVER PROJECT MULTISPECTRAL ANALYSIS
The Hiver Project is also located in the James Bay region of Quebec, covers an area of 32km2 and is
located approximately 4km from the Trans-Taiga Road highway. The Project is adjacent to Megado
Resources’ (ASX: MEG) Cyclone lithium project and in the proximity of multiple lithium exploration
opportunities. The Hiver project contains 52 discreet potential pegmatite signatures have been
identified, which broadly form three clustered areas for follow up investigation (Figure 3 and 4). Quebec
Geological Survey historic outcrop mapping information is also displayed in Figure 4. Previously
mapped outcropping pegmatite lithologies occur at one of the three priority areas.
The Hiver Project geology is interpreted to consist of folded and faulted extensions of greenstone
lithologies (Aquilon Group) against granites of the Tramont Suite. At this early stage of exploration, and
similar to the Dalmas Project the relationship between the geological setting, the historic QGS mapped
pegmatitic outcrops and the potential for economic LCT pegmatite mineralisation will be a focus for
field investigations.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
Figure 3 and 4: Dalmas project with identified pegmatite targets (red outlines) on Sentinel 2 composite
image; and 1:2,000,000 QGS interpreted bedrock geology.
SATELLITE MULTISPECTRAL ANALYSIS
Multispectral analysis can be used as a mineral exploration tool by accessing data collected by
specialised satellites. These satellites have instrumentation capable of measuring the spectral response
of outcropping lithologies at the surface of the earth. The data collected can be used to aid early
regional scale exploration by focusing early exploration efforts on areas that are more likely to have the
right geological conditions to support the target exploration commodity.
Both ASTER and Sentinel-2 multispectral data covering the Dalmas and Hiver projects has been utilised
to generate the target areas presented herein. These satellites collect thermal infrared, visible nearinfrared, and shortwave infrared data which has been processed following industry leading techniques8.
These methods have been developed to target outcropping LCT pegmatites at other project areas, the
learnings are then applied elsewhere for image and target generation.
For the purpose of targeting at the Dalmas and Hiver Projects the spectral signature of the known
outcropping lithium pegmatites at Winsome Resources’ (ASX: WR1) Adina and Jamar projects were
measured. The spectral response signature over known outcropping LCT pegmatite areas was used as
an analogue to aid exploration by identifying similar targets within the Project areas. The Adina and
Jamar projects can reasonably be considered to have desirable outcropping lithologies that are
appropriate analogues for targeting at the Dalmas and Hiver projects.
ROCK CHIP SAMPLING AND RECONNAISSANCE PROGRAM
Prioritisation of the target areas shown above is currently underway. These sites will form the priority
areas to be visited during phase 1 exploration which will include rock chip sampling, ground truthing
and reconnaissance. Field support from Québec based geological contractors is currently being
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
investigated with work planned to begin immediately following satisfaction of due diligence and deal
completion.
ABOUT THE PROJECTS AND QUEBEC AS A SIGNIFICANT LITHIUM REGION
The Company signed a binding letter of intent on 11th August 2023 to acquire two project areas, Dalmas
and Hiver in the James Bay region of Quebec, Canada. Quebec is quickly becoming one of the world’s
leading lithium regions, particularly the James Bay district which hosts multiple large scale lithium
projects including:
•
•
•
•
•
•
Patriot Battery Metals’ (ASX: PMT) Corvette lithium project2 consisting of 109.2Mt @ 1.42% Li20
Inferred, currently the largest hard rock lithium deposit in the Americas
Nemaska Lithium’s (TSX: NMX) Whabouchi lithium project3 with 55.7Mt @ 1.4% Li20 consisting
of 38.5Mt @ 1.45% Li20 Measured and Indicated and 17.2Mt @ 1.29% Li20 Inferred
Critical Elements’ (TSX.V: CRE) Rose lithium project4 with 34.2Mt @ 0.9% Li20 consisting of 31.5Mt
@ 0.91% Li20 Indicated and 2.7Mt @ 0.77% Li20 Inferred
Sayona Mining’s (ASX: SYA) Moblan lithium project5 with 51.4Mt @ 1.30% Li20 Measured,
Indicated and Inferred
Allkem’s (ASX: AKE) James Bay lithium project6 with 54.3Mt @ 1.30% Li20 Indicated and 55.9Mt
@ 1.29% Li20 Inferred
Winsome Resources’ (ASX: WR1)7 who are exploring multiple lithium exploration projects in the
region
Figure 5: Dalmas and Hiver project locations, James Bay, Quebec
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
CAUTIONARY STATEMENT
The Company is optimistic about concluding the transaction and acquisition of the Dalmas and Hiver
Projects outlined herein, however at the date of this announcement no assurance that the conditions
precedent with respect to the transaction will be met. Accordingly, investors are cautioned against
making investment decisions based on this announcement. The transaction is also subject to a grant
of waiver under ASX Listing Rule 7.3.4. There is no guarantee that the ASX Listing Rule 7.3.4 waiver will
be granted. The transaction will not proceed if the Company does not receive the ASX waiver.
CONDITIONS PRECEDENT
• Satisfaction of the Company’s due diligence investigations
• The Company and the Vendors entering into a Definitive Agreement
• Tenements remain in good standing until exercise date with all tenement costs to be covered by the
Vendor
• The Company obtaining any necessary ASX or shareholder approvals or waivers
• The Vendor obtaining any required regulatory approvals
REFERENCES
ASX Announcement 11 August 2023
Patriot Battery Metals (PMT) ASX Announcement 31 July 2023
3
Nemaska Lithium’s TSX Announcement 09 August 2019
4
Critical Element’s TSX.V Announcement 27 July 2022
5
Sayona Mining’s ASX Announcement 17 April 2023
6
Allkem’s ASX Announcement 11 August 2023
7
Winsome Resources (WR1) ASX Announcement 01 August 2023
8
Sentinel-2 - Lithium combination (Kohler, 2021), ASTER Lithium - combination (Cardoso-Fernandes, Joana &
Teodoro, A. & Lima, A. & Perrotta, Mônica & Roda-Robles, Encarnacion. (2020))
1
2
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
LIGHTNING MINERALS PROJECT PORTFOLIO - AUSTRALIA
DUNDAS PROJECT (LIGHTNING MINERALS 100%)
The Dundas Project area is located near Norseman in Western Australia and comprises eight
tenements totalling approximately 454km2. Norseman has a strong history of mining dating back to
1892 and is located 190km south of Kalgoorlie. Historically, Norseman and the Dundas area has
experienced mining in gold and nickel although over recent years the region has emerged as a lithium
and critical minerals province with multiple discoveries and significant exploration activity.
Exploration is ongoing across the Dundas tenements.
There are two project areas at Dundas:
a) South/western tenements surrounding Liontown Resources’ Buldania/Anna lithium Project, and,
b) North/eastern tenements approximately 30km to the east of Alliance Mineral Assets’ Bald Hill
lithium-tantalum Mine.
Figure 6: Location of Lightning Minerals’ Dundas Projects
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
MT JEWELL, MAILMAN HILL AND MT BARTLE PROJECTS (LIGHTNING MINERALS 100%)
Lightning also has 100% interest in the Mt Jewell and Mailman Hill Projects to the north of Kalgoorlie in
Western Australia. The Company holds a 100% interest in the Mt Bartle Project where licence
applications are pending.
The Mt Jewell Project covers approximately 9km2 and is highly prospective for nickel with dominant
lithologies consisting of mafic and ultramafic domains. Mt Jewell is in the locality of the high-grade
Silver Swan, Carr Boyd and Scotia historic nickel mines.
The Mailman Hill Project covers approximately 102km2 and is located 25km east of Leonora and 10km
west of the Murrin Murrin nickel Project. The project is prospective for both gold and nickel.
The Mt Bartle Project covers approximately 396km2 and is prospective for base metals. The project is
situated in the locality of the Magellan lead Mine and 27km north-west of the mining centre of Wiluna.
Figure 7: Location of Lightning Minerals’ projects
This announcement has been approved for release by Alex Biggs, CEO.
-ends
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
ABOUT LIGHTNING MINERALS
Lightning Minerals is a mineral exploration company, listed on the Australian Stock Exchange (ASX:L1M) and focused on the
exploration of critical minerals and lithium at its tenements across Western Australia. The Company’s flagship Dundas project is
located in the prolific Dundas region of Western Australia. The Company also has other projects in Western Australia, Mt Jewell,
Mt Bartle and Mailman Hill prospective for base metals and critical minerals.
FORWARD LOOKING STATEMENTS
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements
can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”,
“anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans,
strategies and objectives of management, anticipated production or construction commencement dates and expected costs or
production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the
Company’s actual results, performance and achievements to differ materially from any future results, performance or
achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations
and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and
project development, including the risks of obtaining necessary licences and permits and diminishing quantities or grades of
reserves, political and social risks, changes to the regulatory framework within which the Company operates or may in the future
operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial
relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial,
market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the
future. The Company does not give any assurance that the assumptions on which forward looking statements are based will
prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other
factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ
materially from those disclosed in forward looking statements, there may be other factors that could cause actual results,
performance, achievements or events not to be as anticipated, estimated or intended, and many events are beyond the
reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking
statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations
under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake
any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions
or circumstances on which any such statement is based.
COMPETENT PERSONS STATEMENT
The information contained herein that relates to exploration results is based on information compiled or reviewed by Mr Jarrad
Woodland, who is a Competent Person and a member of the Australasian Institute of Mining and Metallurgy. Mr Woodland is a
full-time employee of the company. Mr Woodland has sufficient experience which is relevant to the style of mineralisation and
types of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Persons as defined in
the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr
Woodland consents to the inclusion of his name in the matters based on the information in the form and context in which it
appears. Mr Woodland holds options in Lightning Minerals.
REFERENCES TO PREVIOUS ANNOUNCEMENTS
The Company confirms that it is not aware of any new information or data that materially affects the information included in the
original market announcements, and that all material assumptions and technical parameters have not materially changed. The
Company also confirms that the form and context in which the Competent Person’s findings are presented have not been
materially modified from the original market announcements.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429
8806
APPENDIX 1: DUNDAS – JORC CODE 2012 TABLE 1 CRITERIA
The Table below summarises the assessment and reporting criteria used for exploration results for the Dundas Exploration Project and reflects the guidelines in Table 1 of The Australasian Code for
the Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC 2012 Code).
SECTION 1 - SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the
minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
Method of recording and assessing core and chip sample recoveries and
results assessed.
Measures taken to maximise sample recovery and ensure representative
nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate Mineral
Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
Drilling techniques
Drill sample recovery
Logging
Sub-sampling techniques
and sample preparation
Commentary
•
No geochemical analytical data is reported.
•
No sampling has been undertaken by the company.
•
Work described in the release has involved review of the publicly available datasets which are available through the
‘Geomining Information System of Quebec’ - sigeom.mines.gouv.qc.ca
•
Ministère des Resources Naturelles et des Forêts (MERN), the Quebec geological survey (QGS), documents historical
mapping over the Hiver and Dalmas Project areas; and surrounding region with rock descriptions publicly available.
•
No assay data is available for MERN samples/mapping points.
•
The Company is to complete work to verify the publicly available data.
•
No drilling is reported.
•
No drill samples have been taken.
•
•
No drilling completed.
•
No sampling has been undertaken.
Geological observations are qualitative and only include dominant outcrop lithologies at discreet locations, and minerals
of interest.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
Sample security
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make
and model, reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations used in
Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering the
deposit type.
If the relationship between the drilling orientation and the orientation of
key mineralised structures is considered to have introduced a sampling
bias, this should be assessed and reported if material.
The measures taken to ensure sample security.
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
Quality of assay data and
laboratory tests
Verification of sampling
and assaying
Location of data points
Data spacing and
distribution
Orientation of data in
relation to geological
structure
•
No assay data or laboratory test work is reported.
•
•
No data verification has occurred.
•
•
•
All geological maps in this announcement reported in the (NAD83 / UTM zone 18N)
•
Data points are guided by field outcrops instead of regular spacing.
•
•
Field observation points are guided by outcrop location instead of specific orientation.
•
No samples have been taken.
•
No audits or reviews have been undertaken.
The company intends to complete verification works upon historically reported outcrop lithologies during the due
diligence phase of potential acquisition.
Data points mentioned herein have not yet been verified in the field.
All reported locations are assumed to have a +/- 10m accuracy via use of handheld GPS instruments.
No relationship between outcrop mapping sites is known.
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
•
The company intends to complete verification works upon historically reported outcrop lithologies during the due
diligence phase of potential acquisition.
SECTION 2 - REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Mineral tenement and
land tenure status
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Commentary
•
•
The Hiver and Dalmas projects are located in the James Bay Region of Quebec, Canada.
•
•
The Hiver and Dalmas Project are 100% owned by Lithium Rabbit Quebec Pty Ltd.
•
•
•
•
Exploration done by other Acknowledgment and appraisal of exploration by other parties.
parties
•
•
The Hiver and Dalmas projects are centered at approximately 54°03’20”N, 72°01’57”W, and 53°36’01”N, 71°43’18”W
respectively.
Lightning Minerals Ltd signed a binding letter of intent on 11th August 2023 to acquire two project areas, Dalmas and Hiver
in the James Bay region of Quebec, Canada.
The Dalmas project is comprised of 92 mining claims totaling 4,707Ha
The Hiver project is comprised of 62 mining claims totaling 3137Ha
Lithium Rabbit Quebec Pty Ltd retains a 2.0% Net Smelter Royalty, of which 1.0% may be bought back by the Company at
any time for A$1.0 million. The NSR is applicable across both projects.
All tenements are in good standing and are presented in this announcement.
Geological datasets were sourced from Ministère des Resources Naturelles et des Forêts (MERN), the Quebec geological
survey.
No other data by prior explorers is known to the company.
Geology
Deposit type, geological setting and style of mineralisation.
•
The mineralisation sought at the Dalmas and Hiver Project is hosted by a Lithium-Caesium-Tantalum (LCT) type pegmatite.
The host rocks are composted of Archean metasedimentary and greenstone as described in the text.
Drill hole Information
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
dip and azimuth of the hole
o
down hole length and interception depth
o
hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from the
understanding of the report, the Competent Person should clearly explain
why this is the case.
In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
•
No drillholes are reported.
•
No exploration results have been reported.
Data aggregation
methods
Level 6, 505 Little Collins Street, Melbourne VIC 3000 | admin@lightningminerals.com.au | www.lightningminerals.com.au | (08) 9429 8806
Relatio
Share your feedback
Discover